Snowboard Accessories

1 Per pack

Dimensions: 3.9' inches each

Put an end to the senseless winter war of your feet fighting a slippery topsheet with this extra grippy Peace of Foam.

TECHNOLOGIES:

In the backcountry or the backyard, you can easily repair tears in tents, sleeping bags and jackets with the Worn Wear Patch Kit. Four durable patches are made of Tenacious tape, known for its strong adhesive strength. Whimsical designs make every rip an amusing story. Fair Trade Certified sewn.

Details:

Polystick for repairing deep scratches and other damage to ski and snowboard bases.

Polyethylene Stick

For repairing ski and snowboard bases

Easy to work with

Temperature range from -4°C to +4°C. Liquid glide wax for training that can be used alone or as a base layer for racing glide wax. The CH08XL is extremely versatile on both sides of zero and has excellent feedback from racing. It works just as well on old snow at minus temperatures as on falling snow and plus degrees. Quite simply a “must have” product for conditions you will meet frequently.

This is the predecessor to our latest liquid glide wax called HS8. Both products are based on the same chemical formulas and thus have the same properties on the skis, but come in different packaging.

Super fluid and very durable glide wax for training. Temperature range from -2°C to -7°C. Liquid glide wax for training that can be used alone or as a base layer for racing glide wax. CH07XL is at its best in typical winter conditions, below 0°C. It can cope well with various snow conditions, regardless of humidity. A safe choice that rarely underperforms within its core area.

HS8 is a popular glide wax for both base preparation and training.

High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suited for both training and racing.

How to apply HS8: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 150°C.

HS8 is available as both wax and liquid products.

Details:

• A favorite for Nordic skiing disciplines
• A good base wax for topping wax
• Replaces LF8X.
• For training and racing
• HS8 is recommended from -4 to +4 degrees.
• Easy to work with
• Improves ski glide
• Fluoro-free and 100% biodegradable
• Thoroughly tested in different conditions

TS7B is a versatile wax suitable for normal winter conditions below freezing. Its hardness makes it easier to work with and it is easy to achieve a good end result. The black additive reduces friction on cold and contaminated snow. This is a very popular wax in alpine and cross-country skiing, and has shown good performance on artificial snow, as well as on naturally transformed older snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS7B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 150°C.

Details:

• Excellent dry friction properties
• Dirt repellent
• Gives good glide in typical winter conditions
• A good choice on artificial snow.

Diamond stone for polishing and coarse stone for grinding edges. Ski brake retainers included. Ergonomic file guide with 80 mm file.

Details:

• 3-in-1 solution for steel edge repair
• Ergonomic file guide
• Diamond grindstone and coarse grindstone

Demon's most advanced tune kit. Everything you need for a Complete Snowboard/Ski Tune at home or on the go. The Iron is High quality and Custom built for efficiency. This Wax Iron is perfect for Skis and Snowboards. The Iron has an easy turn dial temp gauge, can be switched from 110 or 220.  

Details:

• Edge tuner
• Tuning stone
• White Lighting All Temp Wax
• Wax scraper
• Flat file
• Wire brush
• Mini wax iron
• Polish pad
• Ptex
• Metal scraper
• Includes instructions
• Carry case

Longer then a Grab Rail, yet shorter then a Skate Rail, The Bone provides the perfect topsheet grip to bone out your grabs.  This foam, is bad to the bone.

Details:

• C-Foam - Specifically formulated rubbery foam blend that’s lightweight, heavy duty, and grabs like a crab. 
• Screw Glue - Glued on. Like it was screwed on.
• Gripples - Signature texture: tiny little gripping nipples for maximum grippy-ness..
• Foam squishes into the tread on your boot creating a solid bond.
• Foam is lightweight and feels nice. 
• Foam doesn’t look like some heinous chunk of plastic stomp pad you’d find on a rental board.
• 1 Per Pack
• 8" x 2"

A full logo rendered in soft, squishy Dual C-Foam. Lightweight, heavy duty, and coated in our signature Gripple Texture.

Details:

• ROUND! - No sharp, dangerous corners.
• DUAL C-FOAM - Double the foam for double the fun.
• SCREW GLUE - Glued on. Like it was screwed on.
• GRIPPLES - Signature texture: tiny little gripping nipples for maximum grippy-ness.
• Foam squishes into the tread on your boot creating a solid bond.
• Foam is lightweight and feels nice. 
• Foam doesn’t look like some heinous chunk of plastic stomp pad you’d find on a rental board.
• 1 per pack 
• Dimensions: 12 cm 

Want to be fast like Daron? Keep dreaming! WEND Nano-Tech Speed Paste Wax is designed for a durable, fine film rub-on application, sure to keep you at the head of the pack (but still behind Daron).

A blend of waxes with the addition of our Nano-Tech additives for speed. A high performance paste formula for skiers looking to be out in front no matter the snow conditions. 

Details:

• Using included applicator, apply evenly
• Let dry 
• Polish with felt and then brush

For winter snow that’s on the warmer side of the spectrum, wax your skis or board with Wend NF Performance Warm. This bulk wax has a bit of Wend’s famous MeadowFoam component, a botanical oil extracted from flowers. MeadowFoam helps the wax penetrate and adhere to your bases for a smoother ride and longer durability. This soft wax has a low melting point and is easy to work with.

Details:

• Non fluorinated wax for skis and snowboards
• Universal formula, for temperatures above -12C to +4
• 100g bulk bar (3.5oz)
• Set wax iron to 140F (60C)
• Contains MeadowFoam oil

For winter snow that’s on the warmer side of the spectrum, wax your skis or board with Wend NF Performance Warm. This bulk wax has a bit of Wend’s famous MeadowFoam component, a botanical oil extracted from flowers. MeadowFoam helps the wax penetrate and adhere to your bases for a smoother ride and longer durability. This soft wax has a low melting point and is easy to work with.

Details:

• Non fluorinated wax for skis and snowboards
• Warm formula, for temperatures above 28F (-2C)
• 100g bulk bar (3.5oz)
• Set wax iron to 140F (60C)
• Contains MeadowFoam oil

Anticorp is a local company based in the Snowy Mountains of Australia, Jindabyne. Supplying quality snow product for over 30 years. Run by Riders for the Riders.

Details:

• 15cm Edge Tuning File
• Made in Taiwan

Anticorp is a local company based in the Snowy Mountains of Australia, Jindabyne. Supplying quality snow product for over 30 years. Run by Riders for the Riders.

Details:

• Split Grip 2 Piece PU Stomp Pad with Ice Scraper
• Quick Adhesive mount
• Alcoholic Prep Pad for easy application
• Made in Taiwan

Anticorp is a local company based in the Snowy Mountains of Australia, Jindabyne. Supplying quality snow product for over 30 years. Run by Riders for the Riders.

Details:

• Spike Stomp Pad with Ice Scraper 14.5cm x 8cm
• Quick Adhesive mount
• Alcoholic Prep Pad for easy application
• Made in Taiwan

Anticorp is a local company based in the Snowy Mountains of Australia, Jindabyne. Supplying quality snow product for over 30 years. Run by Riders for the Riders.

Details:

• 6 x Black Anodised Alloy Studs
• Quick Adhesive mount
• Alcoholic Prep Pad for easy application
• Made in Taiwan

90cm Cable length

4 Digit Combo

Thicker cable

This kit includes:

Edge Tuner for 88 / 90 degree side edge angles (includes shavings brush)

Edge file

Brass file brush

Spare binding screws (8pcs)

1 Clear P-Tex

1 Black P-Tex

Metal P-tex scraper

Tuning stone

Wax scraper with edge notch

Polish pad

Tune instruction guide - step by step guide for the inexperienced!

Carry case with zippered mesh pockets and elastic straps for each tool

This wax breaks the mold when it comes to traditional racing waxes. Incorporates natural ingredients that out perform and outlast the rest. WEND NON-FLUORO gives your race ski's/board the ultimate advantage on the flats.

MF Waxes contain a high percentage of Meadowfoam which works similar to fluoro, yet is bio friendly, resists dirt, and conditions your base significantly better!

Meadowfoam is an all-natural plant based wax ingredient that is a safer, biodegradable alternative to fluorocarbon. Specifically designed to increase durability and base penetration, resistance to dirt and better glide. Supporting sustainability without compromising performance.

HS07-18

HS7 VIOLET, -2°C/-8°C, 180G

HIGHLIGHTS

• Fantastic allround-glider
• For training and competition
• Great performance and durability
• Fluoro-free and non-toxic
• Well tested on many conditions

HS10-18

HS10 YELLOW, 0°C/+10°C, 180G

HIGHLIGHTS

• For warm conditions
• Easy to work with
• For training and competition
• Great performance and durability
• Fluoro-free and non-toxic
• Well tested on many conditions

U180 UNIVERSAL Glide WAX, Cold 180G

Green. Bio degradable. Universal hydrocarbon wax for all skis and snowboards, suited for temperature conitions +2 - -10C

Swix HS8 -4ºC/+4ºC 60 g Wax

4°C to +4°C. A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. Recommended iron temp: 130°C