30 products
Swix HS8 Wax 180gm
HS8 is a popular glide wax for both base preparation and training.
High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. HS8 is easy to melt and very convenient to work with. It is equally suited for both training and racing.
How to apply HS8: The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 150°C.
HS8 is available as both wax and liquid products.
Details:
Wend Non-Fluoro MF Race Wax 100g -12C to -4C
This wax breaks the mold when it comes to traditional racing waxes. Incorporates natural ingredients that out perform and outlast the rest. WEND NON-FLUORO gives your race ski's/board the ultimate advantage on the flats.
MF Waxes contain a high percentage of Meadowfoam which works similar to fluoro, yet is bio friendly, resists dirt, and conditions your base significantly better!
Meadowfoam is an all-natural plant based wax ingredient that is a safer, biodegradable alternative to fluorocarbon. Specifically designed to increase durability and base penetration, resistance to dirt and better glide. Supporting sustainability without compromising performance.
Swix HS7 180g Wax
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F).
Swix HS10 180g Wax
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing we recommend to go with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F).
Swix TAA400SU- Universal 70mm Diamond Stone
Universal diamond stone for recreation.
Details:
Swix T157B Horsehair Brush
Brush for TSP powder. Used for final brush of skis and snowboards. Rectangular horsehair brush. Ø approx. 0.15 mm. For final brushing of TSP. 5 to 10 brush strikes recommended.
Details:
Swix T162B Bronze Medium Coarse Bronze First Wax Brush
Bronze brush which is used as the first brush after scraping skis. Rectangular medium bronze brush. Ø 0.15 mm. Use as the first brush on wax after scraping. For removing wax in the structure. 10 brush strokes recommended.
Details:
Swix DHF104BW Marathon, 40g
Burton Riglet Board Reel
This Burton Riglet Reel is your ticket to a easy and fun introduction to snowboarding for you little one. Just attach onto the Burton Chopper, Chicklet, Riglet or After School Special snowboard and you have an easy and fun way to pull your little shredders around on the snow while they get use to moving sideways. Once they are on there way keep it attach and help them over flat spots and tiring chair lift lines.
Swix TA600E Diamond Stone - Economy Fine 100mm
Fine diamond grindstone with plastic plate. White. 100 mm. Used to provide the right smoothness and shine, and long-lasting edges. Great value.
Details:
Swix TA400E Diamond Stone - Medium 100mm
Medium diamond grindstone for racing, 100 mm. Medium diamond grindstone, grade #400. 100 mm. This is the second grindstone you must have to maintain sharp and precise edges. With this grindstone, you can give the edge a fine polishing gloss.
Details:
Swix HF10X Yellow 40g
Temperature range from 0°C to 10°C (32°F to 50°F). Recommended iron temp.: 120°C (248°F). HF10X is made a little bit harder than the old HF10. Our test result shows that a slightly harder wax performs better in this area compared to the old classic, especially noticeable when used alone. The adjusted hardness is also making the wax more durable than before. The speed of the iron should be approx. 8-10 sec. on a snowboard/ ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HF10X can be used as a race wax alone, but is often used as a base for Cera F, such as FC10X and HVC Warm.
We stock a full range of tools and accessories for tuning, waxing and repairing your snowboard. Or just drop into our Jindy store get a professional tune.
Having the right gloves can make or break your snow holiday. Choose your snowboard gloves, mitts or park gloves online before you go.
We have made it easy for you.
Check out the range of Men's, Women's and Kid's Après boots now.